BIOLOGICAL SAFETY CABINET CLASS III

 BIOLOGICAL SAFETY CABINET Class III exhaust 100% of air in the cabinet.

RICO Biological safety cabinet class III is the most effective and most commonly used primary prevention tool in laboratories working with infectious agents. They act as primary obstacles to prevent the escape of biological aerosols in the laboratory environments. Organic safety cabinet class 3, usually only installed in maximum prevention laboratories, is specially designed to work with pathogenic agents, which provides maximum protection. Enclosures are gas-tight gloves which are connected to the front, prevent direct contact with dangerous materials (cabinet class III is sometimes called glove box). These custom-made cabinets are often enclosed in a row, and the built-in lab equipment is usually custom-made.

 

Biosafety cabinet Class III is a fully enclosed airy cabinet of gas-tight construction. Operations within the Class III cabinet are done through attached rubber gloves. When used, Class III cabinet is maintained through negative air pressure of at least 0.5 inch water gauge. Supply air has been prepared in the cabinet through the HEPA filter. The cabinet exhaust air is filtered by two HEPA filters, before the discharge out of the facility, is installed in the chain. The exhaust fan for class III cabinet is generally different from the exhaust fans of the ventilation system of the facility.

Special Features

  • Reduced cost.
  • Slow voice.
  • User friendly Ergonomic design
  • Controlled environmental bias free product protection.
  • The work area is surrounded by negative security, double wall planners for safety.
  • Aerodynamic designed airflow grills protect the block by blockage.
  • Silent vibration - free operation to ensure blower
  • Sound level no more than 65 dbA
  • The unit is suitable for class 100 position.
  • 100% of the air is transmitted through the HEPA filter.
  • Filtered Exhaust - Protects the ambient environment, and avoids particles produced in the air.
  • The exit of the safety cabinet is linked to the virus burnout unit to protect the product and personnel.
  • The air is pulled through the pre-filter and it is made to pass through the high effective HEPA (High efficient air filter) filter.
  • The efficiency of the HEPA filter is more than 99.97% to 0.3 microns.
  • Original material of thick board wood front back top and outer surfaces are covered with Formica.
  • Or cold rolled steel duly powder coated or stainless steel (SS-304) (as ordered).
  • The working table is made of stainless steel sheets (SS-304 grade).
  • Window with predefined locking device opens up to 20 cm + 5 mm height of working.
  • Made in U.V. Germicidal Lights - The sterilization facility of the work area before and after use.
  • Cock - For gas, air or vacuum, (only 1 no.) Is provided.
  • The work area is illuminated by the fluorescent light in the unit.
  • The blower and motor assembly is statistically and dynamically balanced from 1/5 H.P. Capacity works with a minimum noise level.
  • The work table provides the working condition of comfortable "SIT down" for the operator.
  • Single phase 220/230 volt AC. Full supply with cord and plugs to work on the supply.

Applications

  • Clinical laboratory processes
  • Biotechnology
  • Pharmaceutical industry
  • General health care sectors
  • R&D and industrial sectors
  • Bacteria & virus handling

Technical Specifications

Model No

RSI/BSC-22

RSI/BSC-32

RSI/BSC-42

RSI/BSC-62

Working Table Size

2' x 2'

3' x 2'

4' x 2'

6' x 2'

Working Size

2' x 2' x 2'

3' x 2' x 2'

4' x 2' x 2'

6' x 2' x 2'

HEPA Filter Size

2' x 2' x 6"

3' x 2' x 6"

4' x 2' x 6"

3' x 2' x 6"

No. of Motor/Blower

1

1

1

1

Illumination

1 x 40 w

1 x 40 w

2 x 40 w

2 x 40 w

Cabinet Materiel

Wood or Cold Rolled Steel Powder Coated or Stainless Steel (SS-304)

Work Table

Stainless Steel (SS-304 grade)

View Window

In the work room for sampling of samples

Main Filter

HEPA Filter (99.97% efficient at 0.3 micron particles)

Pre-Filter

High efficiency pre-filter (Washable)

Sterilization

By U. V. Germicidal Tube in work area

Manometer

Static pressure analogue type.

Sliding Sash

Counter balanced door for seamless operation

Noise Level

Less than 65 db

Standard Accessory

Gas/Air cock and Multipoint 15/5 Amp. electric socket

Electric Supply

AC 230V, 50/60Hz

Static Pressure Manometer

Can be provided at an additional cost

Exhaust Ducting

Cost per running fee will be increased

HEPA Filtration at exhaust

Can be done at an additional cost

Virus burn out at Exhaust

Can be done at an additional cost

Magnehelic pressure differential gauge

To track the filter pressure in return for a constant pressure manometer (can be provided at an additional cost)

Interlocking of U.V. germicidal tube & fluorescent light

Auto switch off / on mode for motor blower when door is closed / open

Hour meter totalizer for U.V. light

Can be done at an additional cost

Glove Ports and Gauntlets

Can be done at an additional cost

Fumigation Tray – for effective disinfection/ decontamination

Can be done at an additional cost

Electronic filter choke alarm (Differential pressure monitor).

Can be done at an additional cost

Microprocessor LCD controller

With auto switch off mode for motor blower when the door is closed.

Digital buzzer timer

An audio alarm appears when the sterilizing time of the chamber is completed

Need Help ?